Jan 6, 2023
0
Level 6
Can't load .sql to mysql in docker
Hi, i trying to insert the dump.sql to mysql in container, when i execute the command
docker exec -i 9db2b024e3f9 mysql -u tablero -p mypass ANTAIDB_Tablero_GA < Dump20221227_antai.sql
the response is not expected. Any ideias?
mysql Ver 8.0.31 for Linux on x86_64 (MySQL Community Server - GPL)
Copyright (c) 2000, 2022, Oracle and/or its affiliates.
Oracle is a registered trademark of Oracle Corporation and/or its
affiliates. Other names may be trademarks of their respective
owners.
Usage: mysql [OPTIONS] [database]
-?, --help Display this help and exit.
-I, --help Synonym for -?
--auto-rehash Enable automatic rehashing. One doesn't need to use
'rehash' to get table and field completion, but startup
and reconnecting may take a longer time. Disable with
--disable-auto-rehash.
(Defaults to on; use --skip-auto-rehash to disable.)
-A, --no-auto-rehash
No automatic rehashing. One has to use 'rehash' to get
table and field completion. This gives a quicker start of
mysql and disables rehashing on reconnect.
--auto-vertical-output
Automatically switch to vertical output mode if the
result is wider than the terminal width.
-B, --batch Don't use history file. Disable interactive behavior.
(Enables --silent.)
--bind-address=name IP address to bind to.
--binary-as-hex Print binary data as hex. Enabled by default for
interactive terminals.
--character-sets-dir=name
Directory for character set files.
--column-type-info Display column type information.
-c, --comments Preserve comments. Send comments to the server. The
default is --skip-comments (discard comments), enable
with --comments.
-C, --compress Use compression in server/client protocol.
-#, --debug[=#] This is a non-debug version. Catch this and exit.
--debug-check This is a non-debug version. Catch this and exit.
-T, --debug-info This is a non-debug version. Catch this and exit.
-D, --database=name Database to use.
--default-character-set=name
Set the default character set.
--delimiter=name Delimiter to be used.
--enable-cleartext-plugin
Enable/disable the clear text authentication plugin.
-e, --execute=name Execute command and quit. (Disables --force and history
file.)
-E, --vertical Print the output of a query (rows) vertically.
-f, --force Continue even if we get an SQL error.
--histignore=name A colon-separated list of patterns to keep statements
from getting logged into syslog and mysql history.
-G, --named-commands
Enable named commands. Named commands mean this program's
internal commands; see mysql> help . When enabled, the
named commands can be used from any line of the query,
otherwise only from the first line, before an enter.
Disable with --disable-named-commands. This option is
disabled by default.
-i, --ignore-spaces Ignore space after function names.
--init-command=name SQL Command to execute when connecting to MySQL server.
Will automatically be re-executed when reconnecting.
--local-infile Enable/disable LOAD DATA LOCAL INFILE.
-b, --no-beep Turn off beep on error.
-h, --host=name Connect to host.
--dns-srv-name=name Connect to a DNS SRV resource
-H, --html Produce HTML output.
-X, --xml Produce XML output.
--line-numbers Write line numbers for errors.
(Defaults to on; use --skip-line-numbers to disable.)
-L, --skip-line-numbers
Don't write line number for errors.
-n, --unbuffered Flush buffer after each query.
--column-names Write column names in results.
(Defaults to on; use --skip-column-names to disable.)
-N, --skip-column-names
Don't write column names in results.
--sigint-ignore Ignore SIGINT (CTRL-C).
-o, --one-database Ignore statements except those that occur while the
default database is the one named at the command line.
--pager[=name] Pager to use to display results. If you don't supply an
option, the default pager is taken from your ENV variable
PAGER. Valid pagers are less, more, cat [> filename],
etc. See interactive help (\h) also. This option does not
work in batch mode. Disable with --disable-pager. This
option is disabled by default.
-p, --password[=name]
Password to use when connecting to server. If password is
not given it's asked from the tty.
-,, --password1[=name]
Password for first factor authentication plugin.
-,, --password2[=name]
Password for second factor authentication plugin.
-,, --password3[=name]
Password for third factor authentication plugin.
-P, --port=# Port number to use for connection or 0 for default to, in
order of preference, my.cnf, $MYSQL_TCP_PORT,
/etc/services, built-in default (3306).
--prompt=name Set the mysql prompt to this value.
--protocol=name The protocol to use for connection (tcp, socket, pipe,
memory).
-q, --quick Don't cache result, print it row by row. This may slow
down the server if the output is suspended. Doesn't use
history file.
-r, --raw Write fields without conversion. Used with --batch.
--reconnect Reconnect if the connection is lost. Disable with
--disable-reconnect. This option is enabled by default.
(Defaults to on; use --skip-reconnect to disable.)
-s, --silent Be more silent. Print results with a tab as separator,
each row on new line.
-S, --socket=name The socket file to use for connection.
--server-public-key-path=name
File path to the server public RSA key in PEM format.
--get-server-public-key
Get server public key
--ssl-mode=name SSL connection mode.
--ssl-ca=name CA file in PEM format.
--ssl-capath=name CA directory.
--ssl-cert=name X509 cert in PEM format.
--ssl-cipher=name SSL cipher to use.
--ssl-key=name X509 key in PEM format.
--ssl-crl=name Certificate revocation list.
--ssl-crlpath=name Certificate revocation list path.
--tls-version=name TLS version to use, permitted values are: TLSv1.2,
TLSv1.3
--ssl-fips-mode=name
SSL FIPS mode (applies only for OpenSSL); permitted
values are: OFF, ON, STRICT
--tls-ciphersuites=name
TLS v1.3 cipher to use.
--ssl-session-data=name
Session data file to use to enable ssl session reuse
--ssl-session-data-continue-on-failed-reuse
If set to ON, this option will allow connection to
succeed even if session data cannot be reused.
-t, --table Output in table format.
--tee=name Append everything into outfile. See interactive help (\h)
also. Does not work in batch mode. Disable with
--disable-tee. This option is disabled by default.
-u, --user=name User for login if not current user.
-U, --safe-updates Only allow UPDATE and DELETE that uses keys.
-U, --i-am-a-dummy Synonym for option --safe-updates, -U.
-v, --verbose Write more. (-v -v -v gives the table output format).
-V, --version Output version information and exit.
-w, --wait Wait and retry if connection is down.
--connect-timeout=# Number of seconds before connection timeout.
--max-allowed-packet=#
The maximum packet length to send to or receive from
server.
--net-buffer-length=#
The buffer size for TCP/IP and socket communication.
--select-limit=# Automatic limit for SELECT when using --safe-updates.
--max-join-size=# Automatic limit for rows in a join when using
--safe-updates.
--show-warnings Show warnings after every statement.
-j, --syslog Log filtered interactive commands to syslog. Filtering of
commands depends on the patterns supplied via histignore
option besides the default patterns.
--plugin-dir=name Directory for client-side plugins.
--default-auth=name Default authentication client-side plugin to use.
--binary-mode By default, ASCII 'LARACASTS_SNIPPET_PLACEHOLDER' is disallowed and '\r\n' is
translated to '\n'. This switch turns off both features,
and also turns off parsing of all clientcommands except
\C and DELIMITER, in non-interactive mode (for input
piped to mysql or loaded using the 'source' command).
This is necessary when processing output from mysqlbinlog
that may contain blobs.
--connect-expired-password
Notify the server that this client is prepared to handle
expired password sandbox mode.
--network-namespace=name
Network namespace to use for connection via tcp with a
server.
--compression-algorithms=name
Use compression algorithm in server/client protocol.
Valid values are any combination of
'zstd','zlib','uncompressed'.
--zstd-compression-level=#
Use this compression level in the client/server protocol,
in case --compression-algorithms=zstd. Valid range is
between 1 and 22, inclusive. Default is 3.
--load-data-local-dir=name
Directory path safe for LOAD DATA LOCAL INFILE to read
from.
--fido-register-factor=name
Specifies authentication factor, for which registration
needs to be done.
--oci-config-file=name
Specifies the location of the OCI configuration file.
Default for Linux is ~/.oci/config and %HOME/.oci/config
on Windows.
Default options are read from the following files in the given order:
/etc/my.cnf /etc/mysql/my.cnf /usr/etc/my.cnf ~/.my.cnf
The following groups are read: mysql client
The following options may be given as the first argument:
--print-defaults Print the program argument list and exit.
--no-defaults Don't read default options from any option file,
except for login file.
--defaults-file=# Only read default options from the given file #.
--defaults-extra-file=# Read this file after the global files are read.
--defaults-group-suffix=#
Also read groups with concat(group, suffix)
--login-path=# Read this path from the login file.
Please or to participate in this conversation.