isabellathackeray

isabellathackeray

Member Since 4 Months Ago

Experience Points 2,150
Experience Level 1

2,850 experience to go until the next level!

In case you were wondering, you earn Laracasts experience when you:

  • Complete a lesson — 100pts
  • Create a forum thread — 50pts
  • Reply to a thread — 10pts
  • Leave a reply that is liked — 50pts
  • Receive a "Best Reply" award — 500pts
Lessons Completed 19
Lessons
Completed
Best Reply Awards 0
Best Reply
Awards
  • Start Your Engines Achievement

    Start Your Engines

    Earned once you have completed your first Laracasts lesson.

  • First Thousand Achievement

    First Thousand

    Earned once you have earned your first 1000 experience points.

  • One Year Member Achievement

    One Year Member

    Earned when you have been with Laracasts for 1 year.

  • Two Year Member Achievement

    Two Year Member

    Earned when you have been with Laracasts for 2 years.

  • Three Year Member Achievement

    Three Year Member

    Earned when you have been with Laracasts for 3 years.

  • Four Year Member Achievement

    Four Year Member

    Earned when you have been with Laracasts for 4 years.

  • Five Year Member Achievement

    Five Year Member

    Earned when you have been with Laracasts for 5 years.

  • School In Session Achievement

    School In Session

    Earned when at least one Laracasts series has been fully completed.

  • Welcome To The Community Achievement

    Welcome To The Community

    Earned after your first post on the Laracasts forum.

  • Full Time Learner Achievement

    Full Time Learner

    Earned once 100 Laracasts lessons have been completed.

  • Pay It Forward Achievement

    Pay It Forward

    Earned once you receive your first "Best Reply" award on the Laracasts forum.

  • Subscriber Achievement

    Subscriber

    Earned if you are a paying Laracasts subscriber.

  • Lifer Achievement

    Lifer

    Earned if you have a lifetime subscription to Laracasts.

  • Laracasts Evangelist Achievement

    Laracasts Evangelist

    Earned if you share a link to Laracasts on social media. Please email [email protected] with your username and post URL to be awarded this badge.

  • Chatty Cathy Achievement

    Chatty Cathy

    Earned once you have achieved 500 forum replies.

  • Laracasts Veteran Achievement

    Laracasts Veteran

    Earned once your experience points passes 100,000.

  • Ten Thousand Strong Achievement

    Ten Thousand Strong

    Earned once your experience points hits 10,000.

  • Laracasts Master Achievement

    Laracasts Master

    Earned once 1000 Laracasts lessons have been completed.

  • Laracasts Tutor Achievement

    Laracasts Tutor

    Earned once your "Best Reply" award count is 100 or more.

  • Laracasts Sensei Achievement

    Laracasts Sensei

    Earned once your experience points passes 1 million.

  • Top 50 Achievement

    Top 50

    Earned once your experience points ranks in the top 50 of all Laracasts users.

24 Dec
3 months ago

isabellathackeray left a reply on Page Speed

I had the same problem with my website https://draftify.net But laracasts guru @lostrdreamer_nl helped me figure it out.

isabellathackeray left a reply on How To Speed Up Page Loading For Mobile?

@SNAPEY - hey Snapey, look, i found something too https://www.digitalocean.com/community/users/mark730939 your avatar is also famous, maybe i should call you mark?

isabellathackeray left a reply on How To Speed Up Page Loading For Mobile?

@LOSTDREAMER_NL - and this is written by a person without an avatar and a fake name.

19 Dec
4 months ago

isabellathackeray left a reply on How To Speed Up Page Loading For Mobile?

@SNAPEY - now you're stalking me everywhere?)) if you have no evidence, how can you say that?

18 Dec
4 months ago

isabellathackeray left a reply on How To Speed Up Page Loading For Mobile?

@CLICK - It looks very similar to lighthouse, isn't the same tool?

isabellathackeray started a new conversation How To Speed Up Page Loading For Mobile?

I have website https://draftify.net/ which is to slow for mobile devices. Could you please tell me what exactly should i do with it to speed up? Do you know any special tools or plugins? Thanks in advance!

17 Dec
4 months ago

isabellathackeray started a new conversation What Is The Value Of Type

typeof undefined == typeof NULL
``` ?

isabellathackeray left a reply on 45 Useful JavaScript Tips

haters gonna hate

12 Dec
4 months ago

isabellathackeray left a reply on 45 Useful JavaScript Tips

@LOSTDREAMER_NL - If you are so smart you can answer further questions that will be asked here. And it is not necessary to comment topics, which does not interest you. Press ctrl + f5 on the page and you will see the blocks

isabellathackeray left a reply on 45 Useful JavaScript Tips

@LOSTDREAMER_NL - This is a basic knowledge that many users may not know. Perhaps for someone they are primitive, but each of us started from something.

isabellathackeray left a reply on 45 Useful JavaScript Tips

@LOSTDREAMER_NL - Do I have any other way to add an example link to a post? Or should i wait a week before posting something for your calmness?

isabellathackeray started a new conversation 45 Useful JavaScript Tips

As you know, JavaScript is the number one programming language in the world, the language of the web, of mobile hybrid apps (like PhoneGap or Appcelerator), of the server side (like NodeJS or Wakanda) and has many other implementations. It’s also the starting point for many new developers to the world of programming, as it can be used to display a simple alert in the web browser but also to control a robot (using nodebot, or nodruino). The developers who master JavaScript and write organized and performant code have become the most sought after in the job market.

In this article, I’ll share a set of JavaScript tips, tricks and best practices that should be known by all JavaScript developers regardless of their browser/engine or the SSJS (Server Side JavaScript) interpreter.

Note that the code snippets in this article have been tested in the latest Google Chrome version 30, which uses the V8 JavaScript Engine (V8 3.20.17.15).

1 – Don’t forget var keyword when assigning a variable’s value for the first time.

Assignment to an undeclared variable automatically results in a global variable being created. Avoid global variables.

2 – use === instead of ==

The == (or !=) operator performs an automatic type conversion if needed. The === (or !==) operator will not perform any conversion. It compares the value and the type, which could be considered faster than ==.

[10] === 10 // is false [10] == 10 // is true '10' == 10 // is true '10' === 10 // is false [] == 0 // is true [] === 0 // is false '' == false // is true but true == "a" is false '' === false // is false 3 – undefined, null, 0, false, NaN, '' (empty string) are all falsy. 4 – Use Semicolons for line termination

The use of semi-colons for line termination is a good practice. You won’t be warned if you forget it, because in most cases it will be inserted by the JavaScript parser. For more details about why you should use semi-colons, take a look to this artice: http://davidwalsh.name/javascript-semicolons.

5 – Create an object constructor

function Person(firstName, lastName){ this.firstName = firstName; this.lastName = lastName; }

var Saad = new Person("Saad", "Mousliki"); 6 – Be careful when using typeof, instanceof and constructor.

typeof : a JavaScript unary operator used to return a string that represents the primitive type of a variable, don’t forget that typeof null will return “object”, and for the majority of object types (Array, Date, and others) will return also “object”. constructor : is a property of the internal prototype property, which could be overridden by code. instanceof : is another JavaScript operator that check in all the prototypes chain the constructor it returns true if it’s found and false if not. var arr = ["a", "b", "c"]; typeof arr; // return "object" arr instanceof Array // true arr.constructor(); //[] 7 – Create a Self-calling Function

This is often called a Self-Invoked Anonymous Function or Immediately Invoked Function Expression (IIFE). It is a function that executes automatically when you create it, and has the following form:

(function(){ // some private code that will be executed automatically })(); (function(a,b){ var result = a+b; return result; })(10,20) 8 – Get a random item from an array

var items = [12, 548 , 'a' , 2 , 5478 , 'foo' , 8852, , 'Doe' , 2145 , 119];

var randomItem = items[Math.floor(Math.random() * items.length)]; 9 – Get a random number in a specific range

This code snippet can be useful when trying to generate fake data for testing purposes, such as a salary between min and max.

var x = Math.floor(Math.random() * (max - min + 1)) + min; 10 – Generate an array of numbers with numbers from 0 to max

var numbersArray = [] , max = 100;

for( var i=1; numbersArray.push(i++) < max;); // numbers = [1,2,3 ... 100] 11 – Generate a random set of alphanumeric characters

function generateRandomAlphaNum(len) { var rdmString = ""; for( ; rdmString.length < len; rdmString += Math.random().toString(36).substr(2)); return rdmString.substr(0, len);

} 12 – Shuffle an array of numbers

var numbers = [5, 458 , 120 , -215 , 228 , 400 , 122205, -85411]; numbers = numbers.sort(function(){ return Math.random() - 0.5}); /* the array numbers will be equal for example to [120, 5, 228, -215, 400, 458, -85411, 122205] */ A better option could be to implement a random sort order by code (e.g. : Fisher-Yates shuffle), than using the native sort JavaScript function. For more details take a look to this discussion.

13 – A string trim function

The classic trim function of Java, C#, PHP and many other language that remove whitespace from a string doesn’t exist in JavaScript, so we could add it to the String object.

String.prototype.trim = function(){return this.replace(/^s+|s+$/g, "");}; A native implementation of the trim() function is available in the recent JavaScript engines.

14 – Append an array to another array

var array1 = [12 , "foo" , {name "Joe"} , -2458];

var array2 = ["Doe" , 555 , 100]; Array.prototype.push.apply(array1, array2); /* array1 will be equal to [12 , "foo" , {name "Joe"} , -2458 , "Doe" , 555 , 100] */ 15 – Transform the arguments object into an array

var argArray = Array.prototype.slice.call(arguments); 16 – Verify that a given argument is a number

function isNumber(n){ return !isNaN(parseFloat(n)) && isFinite(n); } 17 – Verify that a given argument is an array

function isArray(obj){ return Object.prototype.toString.call(obj) === '[object Array]' ; } Note that if the toString() method is overridden, you will not get the expected result using this trick.

Or use…

Array.isArray(obj); // its a new Array method You could also use instanceof if you are not working with multiple frames. However, if you have many contexts, you will get a wrong result.

var myFrame = document.createElement('iframe'); document.body.appendChild(myFrame);

var myArray = window.frames[window.frames.length-1].Array; var arr = new myArray(a,b,10); // [a,b,10]

// instanceof will not work correctly, myArray loses his constructor // constructor is not shared between frames arr instanceof Array; // false 18 – Get the max or the min in an array of numbers

var numbers = [5, 458 , 120 , -215 , 228 , 400 , 122205, -85411]; var maxInNumbers = Math.max.apply(Math, numbers); var minInNumbers = Math.min.apply(Math, numbers); 19 – Empty an array

var myArray = [12 , 222 , 1000 ]; myArray.length = 0; // myArray will be equal to []. 20 – Don’t use delete to remove an item from array

Use splice instead of using delete to delete an item from an array. Using delete replaces the item with undefined instead of the removing it from the array.

Instead of…

var items = [12, 548 ,'a' , 2 , 5478 , 'foo' , 8852, , 'Doe' ,2154 , 119 ]; items.length; // return 11 delete items[3]; // return true items.length; // return 11 /* items will be equal to [12, 548, "a", undefined × 1, 5478, "foo", 8852, undefined × 1, "Doe", 2154, 119] */ Use…

var items = [12, 548 ,'a' , 2 , 5478 , 'foo' , 8852, , 'Doe' ,2154 , 119 ]; items.length; // return 11 items.splice(3,1) ; items.length; // return 10 /* items will be equal to [12, 548, "a", 5478, "foo", 8852, undefined × 1, "Doe", 2154, 119] */ The delete method should be used to delete an object property.

21 – Truncate an array using length

Like the previous example of emptying an array, we truncate it using the length property.

var myArray = [12 , 222 , 1000 , 124 , 98 , 10 ]; myArray.length = 4; // myArray will be equal to [12 , 222 , 1000 , 124]. As a bonus, if you set the array length to a higher value, the length will be changed and new items will be added with undefined as a value. The array length is not a read only property.

myArray.length = 10; // the new array length is 10 myArray[myArray.length - 1] ; // undefined 22 – Use logical AND/ OR for conditions

var foo = 10; foo == 10 && doSomething(); // is the same thing as if (foo == 10) doSomething(); foo == 5 || doSomething(); // is the same thing as if (foo != 5) doSomething(); The logical OR could also be used to set a default value for function argument.

function doSomething(arg1){ arg1 = arg1 || 10; // arg1 will have 10 as a default value if it’s not already set } 23 – Use the map() function method to loop through an array’s items

var squares = [1,2,3,4].map(function (val) { return val * val; }); // squares will be equal to [1, 4, 9, 16] 24 – Rounding number to N decimal place

var num =2.443242342; num = num.toFixed(4); // num will be equal to 2.4432 NOTE : the toFixed() function returns a string and not a number.

25 – Floating point problems

0.1 + 0.2 === 0.3 // is false 9007199254740992 + 1 // is equal to 9007199254740992 9007199254740992 + 2 // is equal to 9007199254740994 Why does this happen? 0.1 +0.2 is equal to 0.30000000000000004. What you need to know is that all JavaScript numbers are floating points represented internally in 64 bit binary according to the IEEE 754 standard. For more explanation, take a look to this blog post.

You can use toFixed() and toPrecision() to resolve this problem.

26 – Check the properties of an object when using a for-in loop

This code snippet could be useful in order to avoid iterating through the properties from the object’s prototype.

for (var name in object) { if (object.hasOwnProperty(name)) { // do something with name } } 27 – Comma operator

var a = 0; var b = ( a++, 99 ); console.log(a); // a will be equal to 1 console.log(b); // b is equal to 99 28 – Cache variables that need calculation or querying

In the case of a jQuery selector, we could cache the DOM element.

var navright = document.querySelector('#right'); var navleft = document.querySelector('#left'); var navup = document.querySelector('#up'); var navdown = document.querySelector('#down'); 29 – Verify the argument before passing it to isFinite()

isFinite(0/0) ; // false isFinite("foo"); // false isFinite("10"); // true isFinite(10); // true isFinite(undefined); // false isFinite(); // false isFinite(null); // true !!! 30 – Avoid negative indexes in arrays

var numbersArray = [1,2,3,4,5]; var from = numbersArray.indexOf("foo") ; // from is equal to -1 numbersArray.splice(from,2); // will return [5] Make sure that the arguments passed to splice are not negative.

31 – Serialization and deserialization (working with JSON)

var person = {name :'Saad', age : 26, department : {ID : 15, name : "R&D"} }; var stringFromPerson = JSON.stringify(person); /* stringFromPerson is equal to "{"name":"Saad","age":26,"department":{"ID":15,"name":"R&D"}}" / var personFromString = JSON.parse(stringFromPerson); / personFromString is equal to person object */ 32 – Avoid the use of eval() or the Function constructor

Use of eval or the Function constructor are expensive operations as each time they are called script engine must convert source code to executable code.

var func1 = new Function(functionCode); var func2 = eval(functionCode); 33 – Avoid using with() (The good part)

Using with() inserts a variable at the global scope. Thus, if another variable has the same name it could cause confusion and overwrite the value.

34 – Avoid using for-in loop for arrays

Instead of using…

var sum = 0; for (var i in arrayNumbers) { sum += arrayNumbers[i]; } …it’s better to use…

var sum = 0; for (var i = 0, len = arrayNumbers.length; i < len; i++) { sum += arrayNumbers[i]; } As a bonus, the instantiation of i and len is executed once because it’s in the first statement of the for loop. Thsi is faster than using…

for (var i = 0; i < arrayNumbers.length; i++) Why? The length of the array arrayNumbers is recalculated every time the loop iterates.

NOTE : the issue of recalculating the length in each iteration was fixed in the latest JavaScript engines.

35 – Pass functions, not strings, to setTimeout() and setInterval()

If you pass a string into setTimeout() or setInterval(), the string will be evaluated the same way as with eval, which is slow. Instead of using…

setInterval('doSomethingPeriodically()', 1000); setTimeout('doSomethingAfterFiveSeconds()', 5000); …use…

setInterval(doSomethingPeriodically, 1000); setTimeout(doSomethingAfterFiveSeconds, 5000); 36 – Use a switch/case statement instead of a series of if/else

Using switch/case is faster when there are more than 2 cases, and it is more elegant (better organized code). Avoid using it when you have more than 10 cases.

37 – Use switch/case statement with numeric ranges

Using a switch/case statement with numeric ranges is possible with this trick.

function getCategory(age) { var category = ""; switch (true) { case isNaN(age): category = "not an age"; break; case (age >= 50): category = "Old"; break; case (age <= 20): category = "Baby"; break; default: category = "Young"; break; }; return category; } getCategory(5); // will return "Baby" 38 – Create an object whose prototype is a given object

It’s possible to write a function that creates an object whose prototype is the given argument like this…

function clone(object) { function OneShotConstructor(){}; OneShotConstructor.prototype= object; return new OneShotConstructor(); } clone(Array).prototype ; // [] 39 – An HTML escaper function

function escapeHTML(text) { var replacements= {"<": "<", ">": ">","&", """: """}; return text.replace(/[<>&"]/g, function(character) { return replacements[character]; }); } 40 – Avoid using try-catch-finally inside a loop

The try-catch-finally construct creates a new variable in the current scope at runtime each time the catch clause is executed where the caught exception object is assigned to a variable.

Instead of using…

var object = ['foo', 'bar'], i; for (i = 0, len = object.length; i <len; i++) { try { // do something that throws an exception } catch (e) { // handle exception } } …use…

var object = ['foo', 'bar'], i; try { for (i = 0, len = object.length; i <len; i++) { // do something that throws an exception } } catch (e) { // handle exception } 41 – Set timeouts to XMLHttpRequests

You could abort the connection if an XHR takes a long time (for example, due to a network issue), by using setTimeout() with the XHR call.

var xhr = new XMLHttpRequest (); xhr.onreadystatechange = function () { if (this.readyState == 4) { clearTimeout(timeout); // do something with response data } } var timeout = setTimeout( function () { xhr.abort(); // call error callback }, 601000 / timeout after a minute */ ); xhr.open('GET', url, true);

xhr.send(); As a bonus, you should generally avoid synchronous XHR calls completely.

42 – Deal with WebSocket timeout

Generally when a WebSocket connection is established, a server could time out your connection after 30 seconds of inactivity. The firewall could also time out the connection after a period of inactivity.

To deal with the timeout issue you could send an empty message to the server periodically. To do this, add these two functions to your code: one to keep alive the connection and the other one to cancel the keep alive. Using this trick, you’ll control the timeout.

Add a timerID…

var timerID = 0; function keepAlive() { var timeout = 15000; if (webSocket.readyState == webSocket.OPEN) { webSocket.send(''); } timerId = setTimeout(keepAlive, timeout); } function cancelKeepAlive() { if (timerId) { cancelTimeout(timerId); } } The keepAlive() function should be added at the end of the onOpen() method of the webSocket connection and the cancelKeepAlive() at the end of the onClose() method.

43 – Keep in mind that primitive operations can be faster than function calls. Use VanillaJS.

For example, instead of using…

var min = Math.min(a,b); A.push(v); …use…

var min = a < b ? a : b; A[A.length] = v; 44 – Don’t forget to use a code beautifier when coding. Use JSLint and minification (JSMin, for example) before going live.

45 – JavaScript is awesome: Best Resources To Learn JavaScript

Code Academy JavaScript tracks: http://www.codecademy.com/tracks/javascript Eloquent JavaScript by Marjin Haverbeke: http://eloquentjavascript.net/ Advanced JavaScript by John Resig: http://ejohn.org/apps/learn/ Conclusion I know that there are many other tips, tricks and best practices, so if you have any ones to add or if you have any feedback or corrections to the ones that I have shared, please adda comment.